Print-in-place electronics

Print-in-place kinetic desk lamp

An articulating lamp printed with joints and wiring channels in place — snap in an LED strip, no soldering.

No drawings, no software, no experience needed. Your first concept is free.

The idea

An articulating desk lamp whose joints, counterweight and cable channels are made in one print. Pre-routed channels snap-fit standard LED strips and a USB-C module — no soldering. Show the exact assembly order and how wiring flows through the moving joints.

What it teaches: Design for assembly

What the 3D preview shows: Guided wire-routing through the joints

Approximate size: 8 × 8 × 18 in (L × W × H), a starting point you can change.

Parts in the concept

  • • Weighted base
  • • Lower arm
  • • Elbow joint
  • • Upper arm
  • • Head joint
  • • Lamp head shell
  • • LED strip channel
  • • USB-C module pocket

How it's put together

  1. 1. Base & feet. Lay out the base on a flat bench and check it is square before joining. Final joint details need review.
  2. 2. Support frame. Locate the uprights and braces on the base. Clamp in place and check alignment before completing the reviewed connections.
  3. 3. Working surface & fixtures. Fit the upper surface and fixture pads. Confirm clearances using the actual workpiece before finishing.

Tools you'd likely need

  • • 3D printer
  • • Standard LED strip
  • • USB-C power module
  • • Small screwdriver

Starter concept only. Loads, stability, connections, pinch points and originality require review before making or selling it. This is a starter concept, not certified engineering.

Want it made?

TFC reviews suitable small builds for in-house fabrication. Larger or specialized projects may be sourced to manufacturing partners under the TFC name, subject to review, acceptance and your permission.

Try it free in the Studio

More ideas

See all ideas