Molding & casting
Terrazzo cast planter
A tapered cast planter designed with draft so one mold can produce dozens of pieces.
No drawings, no software, no experience needed. Your first concept is free.
The idea
A geometric terrazzo planter / candle holder cast in eco-resin (Jesmonite) or fine concrete, with custom colour chips. Include a slight draft angle so it releases from a reusable mold, and note where bubbles or weak points may form.
What it teaches: Draft angles & mold reuse
What the 3D preview shows: Pour, cure, demold
Approximate size: 6 × 6 × 5 in (L × W × H), a starting point you can change.
Parts in the concept
- • Cast planter body
- • Inner cavity core
- • Outer mold shell
- • Drain plug insert
How it's put together
- 1. Base & feet. Lay out the base on a flat bench and check it is square before joining. Final joint details need review.
- 2. Support frame. Locate the uprights and braces on the base. Clamp in place and check alignment before completing the reviewed connections.
- 3. Working surface & fixtures. Fit the upper surface and fixture pads. Confirm clearances using the actual workpiece before finishing.
Tools you'd likely need
- • Silicone mold
- • Mixing cups and scale
- • Vibration table or tapping
- • Sandpaper
- • Respirator and gloves
Starter concept only. Loads, stability, connections, pinch points and originality require review before making or selling it. This is a starter concept, not certified engineering.
Want it made?
TFC reviews suitable small builds for in-house fabrication. Larger or specialized projects may be sourced to manufacturing partners under the TFC name, subject to review, acceptance and your permission.
Try it free in the StudioMore ideas
Sheet material · flat-pack
Slot-together desk organizer
Jigs & soft goods
Leather passport holder + stitching jig
Single-piece design
No-hinge compliant toolbox
Generative structures
Biomimetic cargo rack
