Automotive · track parts
Track brake cooling duct
A fitted air duct that routes fresh air from a stock mounting pocket toward the brake rotor.
No drawings, no software, no experience needed. Your first concept is free.
The idea
A vehicle-specific brake cooling duct that bolts to stock mounting points and routes air toward the rotor. Every bumper geometry differs, so the duct is designed from the car's actual measurements rather than a universal hose. The animation shows the airflow path as a simple illustrative visualization — real cooling gains need on-track temperature testing. Check your race class rules before fitting anything.
What it teaches: Airflow routing & real-world fit checks
What the 3D preview shows: Air path from scoop to rotor (illustrative)
Approximate size: 12 × 16 × 6 in (L × W × H), a starting point you can change.
Parts in the concept
- • Bumper backing plate
- • Duct inlet scoop
- • Duct body
- • Flexible hose section
- • Upper mounting bracket
- • Lower mounting bracket
- • Hose clamp (×2)
- • Brake rotor reference
How it's put together
- 1. Backing plate & rotor reference. The backing plate represents the car's mounting area and the rotor shows where the air needs to end up. Measure the real bumper and mounting points first — fit is everything.
- 2. Build the duct run. Assemble the inlet scoop, duct body and flex hose so the air path bends toward the rotor without interfering with suspension travel or steering lock.
- 3. Mount & aim the duct. Bolt the brackets to stock points, aim the outlet at the rotor's leading edge, and torque all hardware properly.
Tools you'd likely need
- • Measuring tape and calipers
- • 3D printer or composite molding setup
- • Socket set and torque wrench
- • Brake temperature sensor for testing
Starter concept only. Loads, stability, connections, pinch points and originality require review before making or selling it. This is a starter concept, not certified engineering.
Want it made?
TFC reviews suitable small builds for in-house fabrication. Larger or specialized projects may be sourced to manufacturing partners under the TFC name, subject to review, acceptance and your permission.
Try it free in the StudioMore ideas
Sheet material · flat-pack
Slot-together desk organizer
Molding & casting
Terrazzo cast planter
Jigs & soft goods
Leather passport holder + stitching jig
Single-piece design
No-hinge compliant toolbox
